Skip to content
Contact Us
Start a Project info@nexlavision.com
Generative AI

Image generation that stays on brand at volume

Producing a striking image from a prompt is a solved problem. Producing ten thousand of them that all look like they came from the same brand, sit at the right aspect ratios, and land in the right place in your content system — that is the engineering work, and that is what we build.

Illustrative image generation run: one prompt with a brand adapter and a locked seed produces variants at four aspect ratios; three pass an automated brand check and one is held for human review before publishing to the asset library.

What a production image system actually involves

A demo ends at the image. A production system starts there: it has to be reproducible, reviewable and connected to wherever the asset is going to be used. Most of the value comes from the parts around the model.

Creative production workspace with design tooling on a desk
  1. 01

    Brand conditioning

    Reference images, LoRA adapters or fine-tuned checkpoints so output matches your palette, lighting and product styling rather than a generic house style.

  2. 02

    Deterministic reproduction

    Seeds, prompts and model versions recorded with every asset, so any image can be regenerated or explained months later.

  3. 03

    Review before publish

    A human approval queue with side-by-side variants — because generated imagery reaches customers.

  4. 04

    Pipeline integration

    Assets land in your DAM, PIM or CMS with the right metadata, not in a folder someone has to sort out.

What we build

01

Product visualisation

Catalogue imagery in consistent lighting, angles and settings — including variants for colourways or configurations that were never photographed.

02

Campaign variant generation

One creative direction rendered across every channel, format and aspect ratio required, with layout-safe regions preserved.

03

Style and brand training

Fine-tuning or adapter training on your own asset library so generated output is recognisably yours.

04

Inpainting and editing

Targeted region edits, background replacement and object removal driven by masks rather than by regenerating the whole frame.

05

Batch and API generation

Queued generation at volume with rate limiting, retries and cost tracking, exposed to your systems as a normal API.

06

Safety and rights controls

Content filtering, prohibited-subject rules, provenance metadata and an audit trail of what was generated and by whom.

How it is built

We run generation as a queued service rather than an interactive toy. Requests enter a job queue, execute against a model endpoint you control, and return with full provenance attached. Cost and latency are measured per request from the first prototype.

Typical stack

  • Stable Diffusion
  • FLUX
  • LoRA fine-tuning
  • ComfyUI
  • Python
  • FastAPI
  • Object storage
  • n8n
  • Docker
  • GPU compute
  1. L1

    Model hosting

    Hosted APIs where speed of delivery matters, or self-hosted diffusion models on your own GPUs where data residency, cost at volume or custom weights require it.

  2. L2

    Asset pipeline

    Generation, upscaling, format conversion and CDN delivery as discrete steps that can each be retried independently.

  3. L3

    Prompt management

    Prompts and parameters versioned in source control, not pasted into a spreadsheet.

  4. L4

    Evaluation

    A scored reference set so a model or prompt change can be compared against the previous version rather than judged by eye.

Where it connects

Capability in isolation changes nothing. These are the systems this normally has to reach in order to be useful.

  • DAM and PIM

    Assets written back with product IDs, campaign codes and usage rights already attached.

  • CMS and storefront

    Direct publication into WordPress, Shopify or a headless CMS with correct variants per breakpoint.

  • Design tools

    Handoff into the team's existing editing workflow rather than a separate portal nobody opens.

  • Workflow automation

    Generation triggered by a new SKU, a campaign brief or an approval — see our n8n automation work.

What it looks like in operation

A typical catalogue generation run, from a new product record to a published image.

  1. 01 Product recordtrigger
  2. 02 Prompt buildcompose
  3. 03 Generatediffusion
  4. 04 Brand checkscore
  5. 05 Human reviewapprove
  6. 06 PublishDAM + CDN

How we deliver it

The same six stages apply to every AI build we run. The evaluation set is created before development starts — without it there is no way to tell an improvement from a regression.

  1. 01

    Qualify

    Is a model the right instrument here? A deterministic rule is cheaper, faster and easier to audit when the problem allows one. We say so when it does.

  2. 02

    Prepare data

    Sources identified, access agreed, content parsed and indexed. Data quality sets the ceiling on everything after this point.

  3. 03

    Build the evaluation set

    Real examples with known-good outcomes, collected before any development. This is what makes later decisions measurable.

  4. 04

    Prototype and measure

    A working slice scored against the evaluation set — accuracy, latency and cost per request all measured rather than estimated.

  5. 05

    Integrate and guard

    Wired into the real system with permissions, rate limits, spend caps, fallbacks and human approval wherever the action is irreversible.

  6. 06

    Monitor

    Quality, cost and drift tracked after launch, with the evaluation set re-run whenever a prompt, model or data source changes.

The parts that decide whether it can go live

These are not add-ons quoted separately. They are the conditions under which a system like this is allowed near production data.

  1. 01

    Rights and provenance

    Every asset carries the model, prompt, seed and operator that produced it, so its origin can be demonstrated later.

  2. 02

    Content filtering

    Prohibited-subject and likeness rules enforced before an image leaves the pipeline, not after a complaint.

  3. 03

    Data residency

    Self-hosted deployment where source imagery or product data cannot leave your infrastructure.

  4. 04

    Cost ceilings

    Per-project and per-day spend caps, because generation cost scales with use and nobody wants to find out at month end.

Where this earns its place

  1. 01 E-commerce

    Catalogue at launch speed

    Generate consistent product imagery for long-tail SKUs and new variants without booking a shoot for every one.

  2. 02 Marketing

    Channel-complete campaigns

    Take one approved concept and produce every size, crop and localised version the media plan requires.

  3. 03 Real estate

    Staging and visualisation

    Show empty units furnished, or a development rendered in context, before anything is built.

  4. 04 Manufacturing

    Configuration previews

    Render made-to-order configurations so a buyer sees their specification rather than a generic stock photo.

  5. 05 Publishing

    Editorial illustration

    Original supporting artwork for high-volume article production, in a house style, with rights you control.

  6. 06 Training

    Synthetic datasets

    Generate labelled visual data for edge cases that are rare, unsafe or expensive to capture in the real world.

Text-to-Image, answered plainly

Yes, and this is usually the main body of work. We train a LoRA adapter or fine-tune a checkpoint on your existing approved imagery, then validate against a held-out reference set. The result reproduces your lighting, palette and product presentation rather than a generic look. How closely it matches depends on how consistent your existing library is — we assess that before committing to an approach.

You do. We build on models whose licences permit commercial use and we record the provenance of every asset. Where you supply training imagery, that material and any adapter trained on it remain yours. We confirm the licence position for the specific models in writing during discovery.

For long-tail catalogue work and campaign variants, usually yes — the saving comes from volume rather than from replacing a hero shoot. We would not recommend it for flagship product photography where a real photograph still reads better. We will tell you which side of that line your use case falls on.

Yes. Open-weight diffusion models can be deployed on your own GPU infrastructure or in your cloud tenancy so no product data or imagery leaves your environment. It costs more to run than a hosted API, which is a trade-off we size during discovery.

Have a catalogue that outgrew photography?

Tell us the volume, the brand constraints and where the images need to end up. We will tell you whether generation fits and what it would cost per asset.

Free consultation

Free Consultation Available

Looking for a POS or ERP for your business?

Leave your name and number and tell us which product you are looking at. We will call or message you to understand what you need and prepare a quote.

Include the country code, for example +92 300 1234567

or

  • No obligation
  • English and Arabic
  • Six products